Ready Mix Jointing Compound
Aneeb Bond+ all-purpose Jointing Compound & Skim finish coat is acrylic based with specialized polymer & additives which is applied in a thin layer as jointing & finishing for plasterboard (drywall) to create a perfectly smooth, durable, and paint-ready surface, fixing imperfections, covering joints/screws, and adding water resistance, often involving two coats for best results and a final sanding for that flawless finish and durability, Cement fiber Board.
Characteristics
Convenience: Pre-mixed natural white paste saves time and effort, ensuring a consistent, lump-free paste
Workability: Extended open time (~120 mins pot life) ideal for skim coating large areas
Drying: Air-drying polymer-modified compound that hardens as water evaporates
Application: Easy thin-layer application using wide drywall knife, trowel, or paint roller & squeegee
Finish: Provides a smooth, durable, paint-ready finish with added water resistance
Sanding: Requires only light sanding (120 grit or finer) to achieve a flawless finish
Skim Coat Finish: Polymer-modified paste specifically engineered for seamless smoothing
Jointing & finishing for plasterboard (drywall) and cement fiber boards
Skim coating interior walls and ceilings to create a perfectly smooth, paint-ready surface
Covering panel joints, screw heads, and hiding surface imperfections or old wallpaper texture
How It Works
1. Preparation: Tape all plasterboard joints and cover screw heads; protect floors.
2. First Coat (Roughing-In): Apply a thin, even layer of mixed plaster, jointing & covering the board and filling imperfections.
3. Wait & Scrape: Let it set slightly (15-25 mins), then use a clean float to firm up the surface and blend trowel lines.
4. Second Coat (Laying Down): Apply another thin layer to create the final smooth finish, ensuring it covers everything.
5. Finishing: Once dry, lightly sand with very fine sandpaper (120 grit or finer) and dust off thoroughly.
Storage & Handling: Store at room temperature (13-35°C) in a dry & covered location. Keep container tightly sealed when not in use.
Technical Specifications
| Type | All-purpose polymer-modified pre-mixed paste |
| Appearance | Natural White Paste |
| Application Area | Interior walls and ceilings |
| pH Range | 8–10 |
| Coverage | 0.50 kg per SQM |
| Pot Life | ~120 Minutes (ambient temp dependent) |
| Consistency | Excellent |
Values shown are typical performance ranges. Request the full technical datasheet from our sales team for batch-specific and application-specific figures.
Why Choose Aneeb Chemicals Ready Mix Jointing Compound?
Lab-to-Site Consistency
Formulated at our Ghaziabad facility under strict ISO 9001:2015 standards, ensuring batch quality performs exactly as specified in the datasheet.
Contractor-Centric Design
Developed to minimize application time, cut down material rebounding or wastage, and eliminate complex curing steps on site.
Technical Support
Backed by direct technical guidance from our chemical engineers for surface preparation, dilution ratios, and custom project specs.
Related Products
Gypsum Bond
A ready-to-use polymer bonding agent for gypsum and sand-cement plaster on smooth RCC surfaces, eliminating the need for hacking or wire mesh.
View details
Aneeb Bond + Gypsum Plaster One Coat
A vermiculite-based single-coat gypsum plaster delivering a smooth, superior whitish finish directly over sand-cement, RCC, and masonry surfaces.
View details
Plaster Cum Putty
A water-resistant white/grey cement-based plaster cum putty providing a smooth, durable base on interior and exterior walls and ceilings.
View details