Spray 90

The unique high polymer based formulation is one of unique formulation in the Emulsion state which can bind the concrete and plaster of Paris together. Some of the unique properties of the bonding adhesive are listed below:

Free of POP: The formulation is free of POP and is a water based emulsion of high polymer which has been stabilized under neutral conditions. The formulation is designed for ready to use.

Environment friendly / Safety for the workers: The formulation is water based and thus has pH near 8-9. The neutral pH of the Solution is not harmful for the worker and thus offers safety of the workers.

High Adhesion: It offers outstanding adhesion with concrete—so high that it is hard to break with a hammer in comparison with available solutions. This formulation can provide high adhesive strength due to interlocking of the POP created in the micro voids created in the film. The mechanical locking of POP and chemical interaction with POP is able to provide outstanding adhesion.

High Coverage: This adhesive formulation has low wet density since it contains a higher amount of high polymers than fillers. It also results in high coverage in the range of 9 sq/m.

High tensile strength of the polymer film: The tensile strength of the polymer film is very high and thus it can bear more hanging load. Easy to apply due to low viscosity of 8.816 p at 100rpm with spindle number in viscometer.

How to apply: The bonding agent should be well shaken before applying on a well cleaned surface. The surface should be cleaned with a piece of cloth and should be free of oil or any other organic matter. One coat of the film should be made with the help of spray. The formulation cannot be diluted by the addition of water and the addition of any other additive is not recommended. The formulation should be stored in a clean dry and sealed container, avoided from exposure to direct sunlight.

Apply Timing: Gypsum Plaster will be applied any time once Aneeb Spray90 dries completely onto the surface; approximate time for drying is 24 hours (depending on climatic conditions and location).

Caution: 1. Wash hands with water after use. 2. Keep away from Eye contact; in case of eye contact wash eye thoroughly with water. If irritation persists consult physician. If at all spills on clothes, wash them with plain water immediately.